So quite out of the blue I find myself with a new job.
What happened was the company I currently work for sold off their UK design center (which was originally the company I first joined years and years ago that got bought out a few years back) to another company who make things like SSD’s as part of that I got moved over.

It’s been just over a year now since I moved out here to live in California and given the anniversary I figured some time in reflection would be in order.

I tend to separate work and home by the type of beverage I drink. At work it’s coffee and at home tea. But recently I’d been trying the idea of having a coffee machine at home.

Not posted anything here in a while figured I probably should.

PLA proved a lot of trouble it tended to jam the extruder once to the extent I had to dismantle it. Also getting quality objects out of it was difficult the retained heat proved to be a problem in that objects would stay hot enough to be flexible far longer than with ABS and thus deform while building.

So I had a bash at getting PLA going last night one thing I discovered is the filament storage box (which has a sort of reel + lazy susan connected to a low friction pipe running the filament to the extruder) is not well designed for changing out the reels. I had to unscrew everything and then found most of it wouldn’t go back together with the new reel in.

So after my bike ride last night I ran up the makerbot and began experimenting with the settings in skeinforge according to some helpful guides someone had put up recently. Skeinforge is a very powerful bit of software that can take an STL model and slice it into layers for the makerbot to build but it’s also something of a enigma in terms of user friendlyness.

I’ve been playing with my makerbot off and on but mainly adding various new bits of hardware to it. When I got the kit I ordered it with the heated build platform but at the time I wasn’t getting good enough prints out of the thing to feel it worth the effort of building and installing the thing.

I’ve been getting into the cycling of late. After a rough start where I had my bike nicked after only a couple of weeks of owning it and then the requisit wait to see if anyone would return the thing I got another identical model from the shop.

I woke fairly late on day three something like 10am. The sunday is probably the wind down day of PAX there were few events I wanted to look into and I planned to spend the day on the convention floor.